Bone remolding after adjacent tooth moving into alveolar cleft site repaired by tissue-engineered bone graft

Abstract

Abstract: PURPOSE: To study the biological effects of orthodontic tooth movement into surgical site on bone remodeling after bone graft. METHODS: Twelve SD rats were used as experimental animals. Critical size defects (CSD) were established on maxillary alveolar bone in SPF SD rats (8-week-old, 200±20g). 3D printed polycaprolactone scaffolds and rat bone marrow mesenchymal stem cells were co-cultured in vitro and then were used to be grafted into CSDs as substitution of autogenous bone. Eight weeks after surgery, 3 rats were sacrificed to take samples. H-E staining was used to evaluate the osteogenesis. Meanwhile, orthodontic devices were used to move adjacent teeth into surgical area in one side, the other side was used as control. Three SD rats were sacrificed respectively 1, 3 and 7 days after treatment. Real-time PCR was used to detect the expression of OPN, Trap, Runx2, Rank1, OCN and VEGF between the experimental group and control group. SPSS 19.0 software package was used for statistical analysis. RESULTS: H-E staining revealed abundant bone regeneration and osseous tissue was mature. RT-PCR showed that OCN expressed highest in late stage but had no significant difference between early stage and middle stage; expression of Runx2 rose from early stage to middle stage and declined to late stage; VEGF expression progressively decreased from early stage to late stage; expressions of each gene in the experimental group were significantly higher than the control group (P＜0.05). CONCLUSIONS: Tissue-engineered bone employing 3D printed scaffold can successfully substitute for autogenous bone to regenerate new bone. Using orthodontic method to move adjacent tooth into surgical area can promote bone regeneration, induce osteoblast and osteoclast to remodel bone biological structure.

Key words: Alveolar cleft, 3D printing, Tissue engineering, RT-PCR, Bone remodeling

CLC Number:

R782.1

JIN Can, CHEN Zhen-qi, WU Jun.. Bone remolding after adjacent tooth moving into alveolar cleft site repaired by tissue-engineered bone graft[J]. China Journal of Oral and Maxillofacial Surgery, 2017, 15(4): 320-323.

References

[1] Cho-Lee GY, García-Díez EM, Nunes RA, et al. Review of secondary alveolar cleft repair[J]. Ann Maxillofac Surg, 2013, 3(1): 46-50.
[2] Bergland O, Semb G, Abyholm FE. Elimination of the residual alveolar clefts by secondary bone grafting and subsequent orthodontic treatment [J]. Cleft Palate J, 1986, 23(3): 175-205.
[3] Erverdi N, Usumez S, Solak A, et al. Noncompliance open-bite treatment with zygomatic anchorage[J]. Angle Orthod, 2007, 77(6): 986-990.
[4] Umemori M, Sugawara J, Mitani H, et al. Skeletal anchorage system for open-bite correction[J]. Am J Orthod Dentofacial Orthop, 1999, 115(2): 166-174.
[5] Kuroda S, Katayama A, Takano-Yamamoto T. Severe anterior open-bite case treated using titanium screw anchorage [J]. Angle Orthod, 2004, 74(4): 558-567.
[6] Langer R, Vacanti JP. Tissue engineering [J]. Science, 1993, 260(5110): 920-926.
[7] Vorys GC, Bai H, Chandhanayingyong C, et al. Optimal internal fixation of anatomically shaped synthetic bone grafts for massive segmental defects of long bones [J]. Clin Biomech (Bristol, Avon), 2015, 30(10): 1114-1118.
[8] Vo TN, Ekenseair AK, Spicer PP, et al. In vitro and in vivo evaluation of self-mineralization and biocompatibility of injectable, dual-gelling hydrogels for bone tissue engineering [J]. J Control Release, 2015, 205(1): 25-34.
[9] Huang J, Tian B, Chu F, et al. Rapid maxillary expansion in alveolar cleft repaired with a tissue-engineered bone in a canine model [J]. J Mech Behav Biomed Mater, 2015, 48(1): 86-99.
[10] Lee KW, Wang S, Lu L, et al. Fabrication and characterization of poly (propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding[J]. Tissue Eng, 2006, 12(10): 2801-2811.
[11] Pradel W, Lauer G. Tissue-engineered bone grafts for osteoplasty in patients with cleft alveolus [J]. Ann Anat, 2012, 194(6): 545-548.
[12] 许悦, 陈振琦, 吴军, 等. 唇腭裂合并的单侧牙槽突裂大鼠模型的建立和稳定性研究 [J]. 上海交通大学学报 (医学版), 2010, 30(9): 1111-1114.
[13] Kawamoto T, Motohashi N, Kitamura A, et al. A histological study on experimental tooth movement into bone induced by recombinant human bone morphogenetic protein-2 in beagle dogs [J]. Cleft Palate Craniofac J, 2002, 39(4): 439-448.
[14] 李壬媚, 许悦, 陈振琦, 等. 不同时机牙移动对 SD 大鼠牙槽突裂植骨区骨改建的影响 [J]. 中国口腔颌面外科杂志, 2012, 10(2): 96-100.
[15] 孙健, 陈振琦. 正畸牙移入对牙槽突裂植骨区骨改建的生物学影响[J]. 中国口腔颌面外科杂志, 2014, 12(2): 116-120.
[16] Mason DJ, Hillam RA, Skerry TM. Constitutive in vivo mRNA expression by osteocytes of beta-actin, osteocalcin, connexin-43, IGF-I, c-fos and c-jun, but not TNF-alpha nor tartrate-resistant acid phosphatase [J]. J Bone Miner Res, 1996, 11(3): 350-357.
[17] Sun J, Xu Y, Chen Z. Establishment of a rat model for alveolar cleft with bone wax [J]. J Oral Maxillofac Surg, 2015, 73(4): 733.e1-10.
[18] Chen FM, Sun HH, Lu H, et al. Stem cell-delivery therapeutics for periodontal tissue regeneration [J]. Biomaterials, 2012, 33(27): 6320-6344.
[19] Anderson EM, Kwee BJ, Lewin SA, et al. Local delivery of VEGF and SDF enhances endothelial progenitor cell recruitment and resultant recovery from ischemia [J]. Tissue Eng Part A, 2015, 21(7-8): 1217-1227.