数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析

doi:10.19438/j.cjoms.2022.01.003

中国口腔颌面外科杂志 ›› 2022, Vol. 20 ›› Issue (1): 15-21.doi: 10.19438/j.cjoms.2022.01.003

数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析

张秀秀^1,2, 孙健^1,2,3,4, 李亚莉⁵, 刘延山^1,2, 陈立强^1,2, 许尧祥^1,2, 徐泽先^1,2, 孟坤^1,2, 孙鸣^1,2, 周东阳^1,2, 徐典^1,2, 高小涵^1,2, 程立地^1,2

1.青岛大学附属医院口腔颌面外科,山东青岛 266003;
2.青岛大学口腔医学院,山东青岛 266003;
3.青岛市口腔数字医学与3D打印工程实验室,山东青岛 266003;
4.山东省数字医学与计算机辅助手术重点实验室, 山东青岛 266003;
5.青岛大学附属医院手术室, 山东青岛 266003

收稿日期:2021-06-28 修回日期:2021-09-11 出版日期:2022-01-20 发布日期:2022-01-20
通讯作者: 孙健,E-mail：sunjianqy@126.com
作者简介:张秀秀（1994-）,女,在读硕士研究生,E-mail: zxxkq1229@163.com
基金资助:
山东省科技发展计划项目（2014GSF118108）; 青岛市医疗卫生重点学科建设项目资助

Preparation and property of digital drug-loaded chlorhexidine gluconate PLA/nHA composite scaffold

ZHANG Xiu-xiu^1,2, SUN Jian^1,2,3,4, LI Ya-li⁵, LIU Yan-shan^1,2, CHEN Li-qiang^1,2, XU Yao-xiang^1,2, XU Ze-xian^1,2, MENG Kun^1,2, SUN Ming^1,2, ZHOU Dong-yang^1,2, XU Dian^1,2, GAO Xiao-han^1,2, CHENG Li-di^1,2

1. Department of Oral and Maxillofacial Surgery, Qingdao University Affiliated Hospital. Qingdao 266003;
2. School of Stomatology of Qingdao University. Qingdao 266003;
3. Oral Digital Medicine and 3-Dimensional Printing Engineering Laboratory. Qingdao 266003;
4. Shandong Provincial Key Laboratory of Digital Medicine and Computer-Assisted Surgery. Qingdao 266003;
5. Operating Room, Qingdao University Affiliated Hospital. Qingdao 266003, Shandong Province, China

Received:2021-06-28 Revised:2021-09-11 Online:2022-01-20 Published:2022-01-20

摘要/Abstract

摘要： 目的: 探讨负载葡萄糖酸氯己定壳聚糖纳米球（CSn-CG）3D打印多孔聚乳酸/纳米羟基磷灰石（PLA/nHA）支架的理化性能、细胞相容性及抗菌活性。方法: 借助离子交联法,完成CSn（空白壳聚糖纳米球）与CSn-CG的制备,借助透射电镜（TEM）对纳米球形态进行观察。利用数字化设计3D打印技术,以PLA和nHA为原料,制备PLA/nHA支架。以浸泡法搭载CSn、CSn-CG,实验分为PLA/nHA组、PLA/nHA/CSn组、PLA/nHA/CSn-CG组3组。针对各组支架,通过扫描电镜（SEM）、X射线光电子能谱仪（XPS）、傅立叶红外光谱仪（FTIR）、X射线衍射（XRD）进行表征分析。体外释放实验评估支架的缓释性能,CCK-8法评估支架的生物相容性,琼脂扩散法检测支架的抗菌效果。采用 SPSS 25.0 软件包对所得数据进行统计学分析。结果: CSn-CG为大小均匀的纳米球。SEM下发现, 各组支架均为三维网状结构,孔径规则。体外释放结果表明,CG能够自支架内低速缓慢释放,用时30 d。CCK-8结果显示,PLA/nHA/CSn-CG组可促进小鼠前体成骨细胞（MC3T3-E1）增殖。体外抑菌实验结果显示,PLA/nHA/CSn-CG组具有明显的抑菌圈。结论: 3D打印的PLA/nHA/CSn-CG支架具有良好的理化性能、生物相容性和体外抗菌活性,为在组织工程骨中的进一步应用提供了依据。

关键词: 壳聚糖, 氯己定, 3D打印, 复合支架, 骨组织工程

Abstract: PURPOSE: To investigate the physical and chemical properties, cytocompatibility and antibacterial activity of 3D printed porous polylactic acid/nano-hydroxyapatite(PLA/nHA) scaffolds loaded with chlorhexidine gluconate chitosan nanoparticles (CSn-CG). METHODS: By means of ion crosslinking, CSn (blank chitosan nanospheres) and CSn-CG were prepared. The morphology of the nanospheres was observed under transmission electron microscopy(TEM). PLA/nHA scaffolds were prepared using PLA and nHA as raw materials by digital design and 3D printing technology, and the scaffolds were loaded with CSn and CSn-CG by immersion method. The experiment was divided into PLA/nHA group, PLA/nHA/CSn group and PLA/nHA/CSn-CG group. The scaffolds were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction(XRD). In vitro release test was used to evaluate the sustained-release performance of the scaffolds. CCK-8 method was used to evaluate the biocompatibility of scaffolds. The antibacterial effect of the stent was detected by AGAR diffusion method. SPSS 25.0 software package was used for data analysis. RESULTS: CSn-CG was homogeneous nanospheres. SEM showed that the scaffolds in each group were all three-dimensional network structure with regular pore size. The results of in vitro release showed that CG could be released slowly from the stent at low speed, and the time lasted for 30 days. CCK-8 results showed that PLA/nHA/CSn-CG promoted proliferation of MC3T3-E1. In vitro antibacterial experiment results showed that the experimental group had obvious antibacterial circle, which indicated that the scaffold had good antibacterial effect. CONCLUSIONS: The 3D-printed PLA/nHA/CSn-CG scaffold has good physical and chemical property, biocompatibility and antibacterial effect in vitro, which provides basis for further application of tissue engineered bone.

Key words: Chitosan, Chlorhexidine, 3D printing, Composite scaffolds, Bone tissue engineering

中图分类号:

张秀秀, 孙健, 李亚莉, 刘延山, 陈立强, 许尧祥, 徐泽先, 孟坤, 孙鸣, 周东阳, 徐典, 高小涵, 程立地. 数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析[J]. 中国口腔颌面外科杂志, 2022, 20(1): 15-21.

ZHANG Xiu-xiu, SUN Jian, LI Ya-li, LIU Yan-shan, CHEN Li-qiang, XU Yao-xiang, XU Ze-xian, MENG Kun, SUN Ming, ZHOU Dong-yang, XU Dian, GAO Xiao-han, CHENG Li-di. Preparation and property of digital drug-loaded chlorhexidine gluconate PLA/nHA composite scaffold[J]. China J Oral Maxillofac Surg, 2022, 20(1): 15-21.

参考文献

[1] Vasilev K, Cook J, Griesser HJ.Antibacterial surfaces for biomedical devices[J]. Expert Rev Med Devices, 2009, 6(5): 553-567.
[2] Barros J, Grenho L, Fernandes MH, et al.Anti-sessile bacterial and cytocompatibility properties of CHX-loaded nanohydroxyapatite[J]. Colloids Surf B Biointerfaces, 2015, 130: 305-314.
[3] Lobato-Aguilar HA, Lizama-Uc G, Uribe-Calderon JA, et al.Antibacterial properties and release kinetics of chlorhexidine diacetate from montmorillonite and palygorskite clays[J]. J Biomater Appl, 2020, 34(8): 1052-1958.
[4] Cortizo MC, Oberti TG, Cortizo MS, et al.Chlorhexidine delivery system from titanium/polybenzyl acrylate coating: evaluation of cytotoxicity and early bacterial adhesion[J]. J Dent, 2012, 40(4): 329-337.
[5] Hiraishi N, Yiu CK, King NM, et al.Chlorhexidine release and antibacterial properties of chlorhexidine-incorporated polymethyl methacrylate-based resin cement[J]. J Biomed Mater Res B Appl Biomater, 2010, 94(1): 134-140.
[6] Hook ER, Owen OJ, Bellis CA, et al.Development of a novel antimicrobial-releasing glass ionomer cement functionalized with chlorhexidine hexametaphosphate nanoparticles[J]. J Nanobiotechnology, 2014, 12: 3-11.
[7] de Souza CA, Colombo AP, Souto RM, et al. Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity[J]. Colloids Surf B Biointerfaces, 2011, 87(2): 310-318.
[8] Yang Y, Xu Z, Guo Y, et al.Novel core-shell CHX/ACP nanoparticles effectively improve the mechanical, antibacterial and remineralized properties of the dental resin composite[J]. Dent Mater, 2021, 37(4): 636-647.
[9] 刘峰, 孙健, 李亚莉, 等. 骨形态发生蛋白2壳聚糖纳米缓释载体的制备及性能测定[J]. 上海口腔医学, 2015, 24(2): 147-150.
[10] Zhou DY, Xu ZX, Li YL, et al.Preparation and characterization of thermosensitive hydrogel system for dual sustained-release of chlorhexidine and bovine serum albumin[J]. Mater Lett, 2021, 300: 130121.
[11] Chen X, Gao C, Jiang J, et al.3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration[J]. Biomed Mater, 2019, 14(6): 065003.
[12] Murphy SV, Atala A.3D bioprinting of tissues and organs[J]. Nature Biotechnology, 2014, 32(8): 773-785.
[13] 陈旭卓, 周知航, 郑吉驷, 等. 3D生物打印技术在口腔颌面部骨组织缺损修复的研究进展[J]. 中国口腔颌面外科杂志, 2018,16(3): 95-99.
[14] Hassan H.Nanomaterials for alternative antibacterial therapy[J]. Int J Nanomedicine, 2017, 12: 8211-8225.
[15] Xue Z, Zhao X, Lin Y, et al.Preparation and drug release behavior of pH-responsive bovine serum albumin-loaded chitosan microspheres[J]. J Ind Eng Chem, 2015, 21: 1389-1397.
[16] Liang L, Huang T, Yu S, et al.Study on 3D printed graphene/carbon fiber multi-scale reinforced PLA composites[J]. Mater Lett, 2021,300: 130173.
[17] Zhou Z, Yao Q, Li L, et al.Antimicrobial activity of 3D-printed poly(ε-Caprolactone) (PCL) composite scaffolds presenting vancomycin-loaded polylactic acid-glycolic acid (PLGA) microspheres[J]. Med Sci Monit, 2018, 24: 6934-6945.
[18] 常思佳, 杨柳, 李冉. 明胶-羟基磷灰石-磷酸三钙支架对hDPSCs的成骨刺激作用[J]. 上海口腔医学, 2020, 29(5): 492-498.
[19] Veronesi F, Martini L, Giavaresi G, et al.Bone regenerative medicine: metatarsus defects in sheep to evaluate new therapeutic strategies for human long bone defect. A systematic review[J]. Injury, 2020, 51(7): 1457-1467.
[20] Cooper GM, Mooney MP, Gosain AK, et al.Testing the critical size in calvarial bone defects: revisiting the concept of a critical-size defect[J]. Plast Reconstr Surg, 2010, 125(6): 1685-1692.
[21] Wang X, Liu M, Li H, et al.MgO-incorporated porous nanofibrous scaffold promotes osteogenic differentiation of pre-osteoblasts[J]. Mater Lett, 2021, 299(4): 130098.
[22] Deng N, Sun J, Li Y, et al.Experimental study of rhBMP-2 chitosan nano-sustained release carrier-loaded PLGA/nHA scaffolds to construct mandibular tissue-engineered bone[J]. Arch Oral Biol, 2019, 102(1): 16-25.
[23] 张耀升, 张锴, 陈欣慰, 等. 3D打印个体化钛网的机械力学性能及生物相容性分析[J]. 上海口腔医学, 2020, 29(3): 250-256.
[24] Alcaide M, Serrano MC, Pagani R, et al.L929 fibroblast and Saos-2 osteoblast response to hydroxyapatite-betaTCP/agarose biomaterial[J]. J Biomed Mater Res A, 2009, 89(2): 539-549.
[25] Wang Z, Sun J, Li Y, et al.Experimental study of the synergistic effect and network regulation mechanisms of an applied combination of BMP-2, VEGF, and TGF-β1 on osteogenic differentiation[J]. J Cell Biochem, 2020, 121(3): 2394-2405.
[26] 李林峰, 李月, 李瑞玉, 等. 骨移植和组织工程支架材料在上颌窦提升口腔种植修复中的应用[J]. 中国组织工程研究, 2017, 21(34): 5558-5564.
[27] Family R, Solatihashjin M, Nik SN, et al.Surface modification for titanium implants by hydroxyapatite nanocomposite[J]. Caspian J Intern Med, 2012, 3(3):460-465.
[28] Gao C, Peng S, Feng P, et al.Bone biomaterials and interactions with stem cells[J]. Bone Res, 2017, 5: 17059.
[29] 李敏, 唐元, Shaikh AB, 等. 聚乳酸/羟基磷灰石纳米复合物对MC3T3-E1细胞增殖活性的影响[J]. 中国组织工程研究, 2014, 18(43): 6929-6934.

数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析

Preparation and property of digital drug-loaded chlorhexidine gluconate PLA/nHA composite scaffold

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李利利, 刘小明, 张渊, 武峰, 葛学军, 田志强. 晶须在骨组织工程中的应用进展[J]. 中国口腔颌面外科杂志, 2024, 22(5): 499-504.
[2]	陶文昊, 田刚, 韩煦, 祝迎春, 徐晓刚. 钛合金支架及其表面处理技术研究进展[J]. 中国口腔颌面外科杂志, 2024, 22(5): 505-509.
[3]	楚晨, 宗倩, 寻兴祥, 赵谦, 袁荣涛, 许晓. 温敏性bFGF/Dex脂质体-水凝胶复合支架的神经化骨再生评价[J]. 中国口腔颌面外科杂志, 2024, 22(4): 322-328.
[4]	袁露函, 楚晨, 袁荣涛. 高活性骨替代材料在颌面部骨组织工程中的应用进展[J]. 中国口腔颌面外科杂志, 2024, 22(4): 394-399.
[5]	李永清, 张赟, 惠铄壹, 惠小勇, 许广杰, 杨霞, 肖伯承, 侯锐. 3种不同材料三维模型牙临床应用特点比较[J]. 中国口腔颌面外科杂志, 2024, 22(3): 239-244.
[6]	郁玺玺, 徐诸凤, 张媛媛, 吕明明, 王进兵, 王悦平. 3D打印偏颌测量仪的研制及在偏颌患者康复期的应用效果[J]. 中国口腔颌面外科杂志, 2024, 22(3): 255-260.
[7]	樊文慧, 劳峥, 石慧烽, 毕帆, 涂文勇, 胡海生. 3D打印可分离式口腔支架在口腔癌放疗中的摆位准确性研究[J]. 中国口腔颌面外科杂志, 2022, 20(5): 466-470.
[8]	罗彬, 周美云, 田绣云, 陈鑫如, 韩瑞, 徐锦程. 数字化及3D打印联合内镜辅助技术治疗12例颧骨颧弓骨折效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(2): 188-192.
[9]	史伟红, 刘严, 阿曼妮萨罕·加帕尔, 阿依达娜·乌拉尔别克, 贺琦, 凌彬. 3D打印定位导板在辅助制备股前外侧穿支皮瓣中的临床应用[J]. 中国口腔颌面外科杂志, 2022, 20(1): 52-57.
[10]	杨勇, 丁明超, 杨涛, 刘义闻, 陆金标, 田磊. 基于3D打印水凝胶技术的显微外科仿真训练教具的研制与应用效果评价[J]. 中国口腔颌面外科杂志, 2021, 19(6): 557-561.
[11]	杜福江, 何水明, 朱鹏娜. 个体化3D打印头颅模型辅助三维预成型钛网在6例复杂上颌骨骨折治疗中的应用[J]. 中国口腔颌面外科杂志, 2021, 19(4): 368-371.
[12]	吕继连, 赵媛, 蔡晓清, 张瑞. MR及3D打印在陈旧性颧眶复合体骨折手术中的应用[J]. 中国口腔颌面外科杂志, 2020, 18(6): 512-515.
[13]	王文雪, 姜帅, 梅东梅, 李晓静, 姚晨阳, 王大山, 赵保东. 3D打印导板在上前牙种植中的精度评价[J]. 中国口腔颌面外科杂志, 2020, 18(2): 127-131.
[14]	黄立, 李璐, 江灿洋, 黄建平, 江燕, 廖云阳, 林李嵩. 3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(4): 371-375.
[15]	徐冰冰, 李雅南, 来庆国, 唐晓朋, 慈江波, 薛润琦, 邹斌, 邢宏宇. 3D打印术前设计和内镜辅助在颧骨颧弓骨折复位固定术中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(1): 44-47.