MR及3D打印在陈旧性颧眶复合体骨折手术中的应用

doi:10.19438/j.cjoms.2020.06.008

中国口腔颌面外科杂志 ›› 2020, Vol. 18 ›› Issue (6): 512-515.doi: 10.19438/j.cjoms.2020.06.008

MR及3D打印在陈旧性颧眶复合体骨折手术中的应用

吕继连, 赵媛, 蔡晓清, 张瑞

郑州大学附属郑州中心医院口腔颌面外科,河南郑州 450007

收稿日期:2020-04-26 修回日期:2020-06-23 发布日期:2020-12-31
通讯作者: 吕继连,E-mail:jilianlv@163.com
作者简介:吕继连(1980-),女,硕士,副主任医师
基金资助:
河南省科技攻关项目(182102311118,201702307);河南省科技攻关计划联合共建项目(2018020779);河南省高等学校重点科研项目(19A320071)

The Application of mixed reality and 3D printing in the treatment of long-standing zygomatic orbital complex fracture

LYU Ji-lian, ZHAO Yuan, CAI Xiao-qing, ZHANG Rui

Department of Oral and Maxillofacial Surgery, Zhengzhou Central Hospital Affiliated to Zhengzhou University, Zhengzhou, 450007,Henan Province, China

Received:2020-04-26 Revised:2020-06-23 Published:2020-12-31

摘要/Abstract

摘要： 目的: 探讨混合现实(MR) 及3D 打印技术在陈旧性颧眶复合体骨折手术中的应用效果。方法: 8例陈旧性颧骨骨折患者应用MR及3D打印技术实施手术,术前将CT数据导入计算机医学图像处理软件行骨折块分割、虚拟复位,3D打印骨折复位后模型,术中行钛板坚固内固定、MR精准验证定位,术后对比观察健、患侧面部外形及对称性。采用SPSS 22.0软件包中的配对t检验比较手术前、后双侧颧骨的突度和高度差值。结果: 患者术后开口度及咀嚼功能恢复正常,手术创面均一期愈合,无出血及感染等并发症。双侧面型对称,双侧颧骨突度及高度一致,手术前、后颧骨的突度差值分别为(9.82±1.11)和(1.12±0.48)mm;高度差值分别为(10.19±1.01)和(1.13±0.42)mm;与术前相比,差异均有统计学意义(t=24.77,P<0.05;t=24.68,P<0.05)。结论: 应用混合现实及3D打印技术修复陈旧性颧眶复合体骨折,有效恢复了面中部外形和咀嚼功能,实现了精确、个性化治疗目的: ,为临床诊疗提供了新的手段。

关键词: 混合现实, 3D打印, 陈旧性颧眶复合体骨折

Abstract: PURPOSE: To investigate the effect of mixed reality (MR) and 3D printing in the treatment of long-standing zygomatic orbital complex fracture. METHODS: Eight cases with long-standing zygomatic fracture were operated based on MR and 3D printing technology. CT data were imported into the computer medical image processing software for fracture segmentation, virtual reduction, 3D printing of fracture reduction model. During operation, titanium plate rigid internal fixation, MR accurate verification and positioning were performed. Facial shape and symmetry were compared and observed on the healthy side after operation. The difference of protrusion and height of bilateral zygoma before and after operation was compared by t test with SPSS 22.0 software package. RESULTS: Mouth opening and masticatory function of the patients returned to normal after operation. The wounds healed at one stage without bleeding and infection. The two sides of the face, the protrusion and height of the bilateral zygoma were the same. The difference of protrusion and height of the zygoma before and after operation were (9.82±1.11) mm, (1.12±0.48) mm and (10.19±1.01) mm, (1.13±0.42) mm, respectively. The difference was statistically significant compared with that before operation (t=24.77, P<0.05; t=24.68, P<0.05). CONCLUSIONS: MR and 3D printing technology can effectively restore the shape of the middle face and masticatory function, achieve accurate and personalized treatment, and provide a new way for clinical diagnosis and treatment.

Key words: Mixed reality, 3D printing, Long-standing zygomatic orbital complex fracture

中图分类号:

R782

吕继连, 赵媛, 蔡晓清, 张瑞. MR及3D打印在陈旧性颧眶复合体骨折手术中的应用[J]. 中国口腔颌面外科杂志, 2020, 18(6): 512-515.

LYU Ji-lian, ZHAO Yuan, CAI Xiao-qing, ZHANG Rui. The Application of mixed reality and 3D printing in the treatment of long-standing zygomatic orbital complex fracture[J]. China J Oral Maxillofac Surg, 2020, 18(6): 512-515.

参考文献

[1] GyeongHyeon D, Sujin B, Ki YH, et al. Delayed formation of sterile abscess after zygomaticomaxillary complex fracture treatment with bioabsorbable plates[J]. Arch Craniofac Surg, 2018, 19(2): 143-147.
[2] Miyazaki H, Okuda K, Ueno K, et al.Swinging eyelid approach to zygomaticomaxillary complex fracture[J]. J Craniofac Surg, 2019, 30(7): e655-e658.
[3] Lin Q, Hong X Y, Zhang D, et al.Preoperative evaluation and surgical technique of functional and cosmetic aspects in zygomatic complex fracture patients[J]. J Biol Regul Homeost Agents, 2017, 31(4): 1005-1012.
[4] Tepper OM, Rudy HL, Lefkowitz A, et al.Mixed reality with holoLens: where virtual reality meets augmented reality in the operating room[J]. J Plast Reconstr Aesthet Surg, 2017, 140(5): 1066-1070.
[5] Brun H, Bugge RAB, Suther LKR, et al.Mixed reality holograms for heart surgery planning: first user experience in congenital heart disease[J]. Eur Heart J Cardiovasc Imaging, 2019, 20(8): 883-888.
[6] He Y, Zhang Y, An JG, et al.Zygomatic surface marker-assisted surgical navigation: a new computer-assisted navigation method for accurate treatment of delayed zygomatic fractures[J]. J Oral Maxillfac Surg, 2013, 71(12): 2101-2114.
[7] El-Anwar MW, Sweed A H.Infraorbital foramen localization in orbitozygomatic fractures: a CT study with intraoperative finding[J]. Eur Arch Otorhinolaryngol, 2018, 275(3): 809-813.
[8] 中华口腔医学会口腔颌面外科专业委员会. 导航引导单侧陈旧性颧骨骨折整复术技术流程及操作的专家共识[J]. 中华口腔医学杂志, 2019, 54(6): 363-367.
[9] Shikara MA, Vakharia KT, Greywoode JD.Greywoode zygomaticomaxillary complex-orbit fracture alignment: comparison of buccal and orbital approach techniques[J]. JAMA Facial Plast Surg, 2018, 20(5): 428-429.
[10] Yang L, Grottkau B, He Z, et al.Three dimensional printing technology and materials for treatment of elbow fractures[J]. Int Orthop, 2017, 41(11): 2381-2387.
[11] 徐冰冰, 李雅南, 来庆国, 等. 3D打印术前设计和内镜辅助在颧骨颧弓骨折复位固定术中的应用[J].中国口腔颌面外科杂志, 2018, 16(1): 44-47.
[12] 马小军, 林艳萍, 黄亚磊, 等. 混合现实技术在骨与软组织肿瘤精准手术中的应用探索[J]. 中华解剖与临床杂志, 2019, 24(4): 322-326.
[13] Ogawa H, Hasegawa S, Tsukada S, et al.A pilot study of augmented reality technology applied to theacetabular cup placement during total hip arthroplasty[J]. J Arthroplasty, 2018, 33(6): 1833-1837.
[14] Zavattero E, Romano M, Gerbino G, et al.Evaluation of the accuracy of virtual planning in orthognathic surgery:a morphometric study[J]. J Craniofac Surg, 2019, 30(4):1214-1220.
[15] Zeiger J, Costa A, Bederson J, et al.Use of mixed reality visualization in endoscopic endonasal skull base surgery[J]. Oper Neurosurg, 2020, 19(1): 43-52.

MR及3D打印在陈旧性颧眶复合体骨折手术中的应用

The Application of mixed reality and 3D printing in the treatment of long-standing zygomatic orbital complex fracture

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陶文昊, 田刚, 韩煦, 祝迎春, 徐晓刚. 钛合金支架及其表面处理技术研究进展[J]. 中国口腔颌面外科杂志, 2024, 22(5): 505-509.
[2]	袁露函, 楚晨, 袁荣涛. 高活性骨替代材料在颌面部骨组织工程中的应用进展[J]. 中国口腔颌面外科杂志, 2024, 22(4): 394-399.
[3]	李永清, 张赟, 惠铄壹, 惠小勇, 许广杰, 杨霞, 肖伯承, 侯锐. 3种不同材料三维模型牙临床应用特点比较[J]. 中国口腔颌面外科杂志, 2024, 22(3): 239-244.
[4]	郁玺玺, 徐诸凤, 张媛媛, 吕明明, 王进兵, 王悦平. 3D打印偏颌测量仪的研制及在偏颌患者康复期的应用效果[J]. 中国口腔颌面外科杂志, 2024, 22(3): 255-260.
[5]	樊文慧, 劳峥, 石慧烽, 毕帆, 涂文勇, 胡海生. 3D打印可分离式口腔支架在口腔癌放疗中的摆位准确性研究[J]. 中国口腔颌面外科杂志, 2022, 20(5): 466-470.
[6]	罗彬, 周美云, 田绣云, 陈鑫如, 韩瑞, 徐锦程. 数字化及3D打印联合内镜辅助技术治疗12例颧骨颧弓骨折效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(2): 188-192.
[7]	张秀秀, 孙健, 李亚莉, 刘延山, 陈立强, 许尧祥, 徐泽先, 孟坤, 孙鸣, 周东阳, 徐典, 高小涵, 程立地. 数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析[J]. 中国口腔颌面外科杂志, 2022, 20(1): 15-21.
[8]	史伟红, 刘严, 阿曼妮萨罕·加帕尔, 阿依达娜·乌拉尔别克, 贺琦, 凌彬. 3D打印定位导板在辅助制备股前外侧穿支皮瓣中的临床应用[J]. 中国口腔颌面外科杂志, 2022, 20(1): 52-57.
[9]	杨勇, 丁明超, 杨涛, 刘义闻, 陆金标, 田磊. 基于3D打印水凝胶技术的显微外科仿真训练教具的研制与应用效果评价[J]. 中国口腔颌面外科杂志, 2021, 19(6): 557-561.
[10]	杜福江, 何水明, 朱鹏娜. 个体化3D打印头颅模型辅助三维预成型钛网在6例复杂上颌骨骨折治疗中的应用[J]. 中国口腔颌面外科杂志, 2021, 19(4): 368-371.
[11]	陈铭韬, 杨嵘, 季彤. 混合现实技术在口腔颌面外科的应用进展[J]. 中国口腔颌面外科杂志, 2020, 18(6): 559-562.
[12]	王文雪, 姜帅, 梅东梅, 李晓静, 姚晨阳, 王大山, 赵保东. 3D打印导板在上前牙种植中的精度评价[J]. 中国口腔颌面外科杂志, 2020, 18(2): 127-131.
[13]	黄立, 李璐, 江灿洋, 黄建平, 江燕, 廖云阳, 林李嵩. 3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(4): 371-375.
[14]	徐冰冰, 李雅南, 来庆国, 唐晓朋, 慈江波, 薛润琦, 邹斌, 邢宏宇. 3D打印术前设计和内镜辅助在颧骨颧弓骨折复位固定术中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(1): 44-47.
[15]	孙少龙, 来庆国, 唐晓朋, 慈江波, 李艳, 薛润琪, 张志超. 3D打印技术在眶底缺损修复重建中的应用[J]. 中国口腔颌面外科杂志, 2017, 15(6): 515-518.