数字化模型外科在牙颌面畸形治疗中的应用

中国口腔颌面外科杂志 ›› 2015, Vol. 13 ›› Issue (6): 497-501.

数字化模型外科在牙颌面畸形治疗中的应用

王敏娇，司家文，张剑飞，王旭东，沈国芳* ，于洪波*

上海交通大学医学院附属第九人民医院?口腔医学院口腔颅颌面科，上海市口腔医学重点实验室，上海 200011

收稿日期:2014-12-17 出版日期:2015-11-20 发布日期:2015-12-03
通讯作者: 于洪波，Tel：021-23271699-5544，E-mail:hongboyuhj@hotmail.com；沈国芳，Tel:021-23271207,E-mail:maxillofacsurg@163.com。
作者简介:王敏娇（1991-），女，硕士研究生，E-mail：wangminjiao442773955@126.com.
基金资助:
Supported by National Natural Science Foundation of China (81101131) , Leading Project of Science and Technology Committee of Shanghai Municipality(12XD1403200) and Research Fund of Health and Family Planning Committee of Pudong District (PW2012D-11).

Digital model surgery in planning, prediction and evaluation of dento-maxillofacial deformities

WANG Min-jiao, SI Jia-wen, ZHANG Jian-fei, WANG Xu-dong, SHEN Guo-fang, YU Hong-bo.

Department of Oral and Craniomaxillofacial Science, Shanghai Ninth People’s Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine; Shanghai Key Laboratory of Stomatology. Shanghai 200011, China

Received:2014-12-17 Online:2015-11-20 Published:2015-12-03
Contact: 国家自然科学基金(81101131）；上海市科学技术委员会学科带头人项目（12XD1403200）；浦东新区卫生、计生科技项目（PW2012D-11）

摘要/Abstract

摘要： 目的：探讨数字化模型外科在牙颌面畸形治疗中的应用价值。方法：选取15例牙颌面畸形患者，通过CT重建模型与激光扫描牙列模型，构建数字化颅颌面-牙列模型，在此基础上进行手术设计，并且三维打印板及导板，指导手术。术后3个月进行面部对称性及手术精确度评价。结果：所有患者均顺利完成手术虚拟设计、板和导板三维打印以及正颌手术。偏颌畸形患者术后对称性明显改善，术后CT模型与术前设计比较，最大差异度<2 mm。结论：利用数字化模型外科可进行手术设计，模拟，预测，并且可以三维打印板及导板指导手术，在牙颌面畸形的治疗中具有广泛的应用价值，值得临床推广。

关键词: 数字化模型外科, 牙颌面畸形, 虚拟设计, 正颌手术, 三维打印

Abstract: PURPOSE : To explore the application of digital model surgery in the treatment of dento-maxillofacial deformities. METHODS : Fifteen patients of dento-maxillofacial deformities were enrolled in this study. Digital craniomaxillofacial-dentition model was established by combined 3D CT and laser-scanned dentition model. Based on this model, surgical planning, simulation and postoperative prediction were performed. Under the guidance of 3D printed splint and guide, orthognathic surgery and asymmetry correction were carried out. Clinical examination was performed 3 months after surgery. Surgical accuracy was evaluated by comparing the postoperative CT 3D model with preoperative surgical planning. RESULTS : All patients underwent virtual surgical planning, splint and guide 3D printing and orthognathic surgery successfully. Facial symmetry was greatly improved after surgery. The mean deviation between the preoperative design and actual surgical results was less than 2 mm. CONCLUSIONS : With the ability of preoperative planning, surgical simulation and postoperative prediction, digital model surgery shows its great value in improving the accuracy of orthognathic surgery and restoring facial symmetry. It is regarded as a valuable technique in this potentially complicated procedure.

Key words: Digital model surgery, Dento-maxillofacial deformities, Virtual surgical planning, Orthognathic surgery, 3D printing

中图分类号:

R782.2.3

王敏娇，司家文，张剑飞，王旭东，沈国芳* ，于洪波*. 数字化模型外科在牙颌面畸形治疗中的应用[J]. 中国口腔颌面外科杂志, 2015, 13(6): 497-501.

WANG Min-jiao, SI Jia-wen, ZHANG Jian-fei, WANG Xu-dong, SHEN Guo-fang, YU Hong-bo.. Digital model surgery in planning, prediction and evaluation of dento-maxillofacial deformities[J]. China J Oral Maxillofac Surg, 2015, 13(6): 497-501.

参考文献

[1] 沈国芳. 新技术在当代牙颌面畸形矫治中的开发与应用 [J]. 口腔颌面外科杂志, 2007, 17(2): 109-113.
[2] 闫晋, 沈国芳, 宋丽媛. 三维CT对颅颌面骨性结构的测量与分析 [J]. 口腔颌面外科杂志, 2009, 19(4): 261-266.
[3] 张诗雷, 张志愿, 沈国芳. 基于CT的三维正颌手术仿真模拟平台的建立 [J]. 中国口腔颌面外科杂志, 2004, 2(2): 95-98.
[4] Marmulla R, Mühling J. The influence of computed tomography motion artifacts on computer-assisted surgery [J]. J Oral Maxillofac Surg, 2006, 64(3): 466-470.
[5] Swennen GR, Mollemans W, Schutyser F. Three-dimensional treatment planning of orthognathic surgery in the era of virtual imaging [J]. J Oral Maxillofac Surg, 2009, 67(10): 2080-2092.
[6] Schendel SA, Jacobson R. Three-dimensional imaging and computer simulation for office-based surgery [J]. J Oral Maxillofac Surg, 2009, 67(10): 2107-2114.
[7] Ellis E 3rd. Accuracy of model surgery: evaluation of an old technique and introduction of a new one [J]. J Oral Maxillofac Surg, 1990, 48(11): 1161-1167.
[8] Baker SB, Goldstein JA, Seruya M. Outcomes in computer-assisted surgical simulation for orthognathic surgery [J]. J Craniofac Surg, 2012, 23(2): 509-513.
[9] Aboul-Hosn Centenero S, Hern?ndez-Alfaro F. 3D planning in orthognathic surgery: CAD/CAM surgical splints and prediction of the soft and hard tissues results - our experience in 16 cases [J]. J Oral Maxillofac Surg, 2012, 40(2): 162-168.
[10] Hsu SS, Gateno J, Bell RB, et al. Accuracy of a computer-aided surgical simulation protocol for orthognathic surgery: a prospective multicenter study [J]. J Oral Maxillofac Surg, 2013, 71(1): 128-142.
[11] Xia JJ, Gateno J, Teichgraeber JF, et al. Accuracy of the computer-aided surgical simulation (CASS) system in the treatment of patients with complex craniomaxillofacial deformity: A pilot study [J]. J Oral Maxillofac Surg, 2007, 65(2): 248-254.
[12] Marmulla R, Muhling J. Computer-assisted condyle positioning in orthognathic surgery [J]. J Oral Maxillofac Surg, 2007, 65(10): 1963-1968.
[13] Perez D, Ellis E 3rd. Sequencing bimaxillary surgery: mandible first [J]. J Oral Maxillofac Surg, 2011, 69(8): 2217-2224.
[14] Zizelmann C, Hammer B, Gellrich NC, et al. An evaluation of face-bow transfer for the planning of orthognathic surgery [J]. J Oral Maxillofac Surg, 2012, 70(8): 1944-1950.

[1]	王烨, 黄慧敏, 王圆, 吕翔. 不同体位对正颌术后气管拔管安全性及应激反应的影响[J]. 中国口腔颌面外科杂志, 2024, 22(2): 181-185.
[2]	郑阳山, 袁学顺, 姜晶, 邱书奇, 石照辉. 儿童口呼吸诊断及对牙颌面发育的影响[J]. 中国口腔颌面外科杂志, 2024, 22(1): 92-101.
[3]	葛卫文, 祁磊, 王昀, 张雷. 改良鼻旁植骨减少Le Fort I型截骨术后上颌骨垂直向复发的探讨[J]. 中国口腔颌面外科杂志, 2023, 21(2): 163-167.
[4]	王守鹏, 孟箭, 张雷. 上颌骨Le Fort Ⅰ型截骨术后上颌窦炎的研究现状[J]. 中国口腔颌面外科杂志, 2023, 21(1): 75-80.
[5]	张大河, 沈佩, 杨驰. 青少年颞下颌关节盘前移位患者就诊情况分析[J]. 中国口腔颌面外科杂志, 2022, 20(5): 437-442.
[6]	张大河, 沈佩, 杨驰. 青少年颞下颌关节盘前移位患者就诊情况分析[J]. 中国口腔颌面外科杂志, 2022, 20(5): 443-448.
[7]	蒋胜杰, 梅鹏, 周皓楠, 潘兆澄, 高源, 蔡鸣. 三维打印含铜钛合金对骨髓间充质干细胞成骨分化的影响[J]. 中国口腔颌面外科杂志, 2022, 20(4): 334-339.
[8]	陶乐然, 张容斌, 林郁欣, 凌宗翔, 程梦佳, 于洪波. 深度学习在牙颌面畸形诊疗中的应用及研究进展[J]. 中国口腔颌面外科杂志, 2022, 20(4): 405-409.
[9]	瞿然奕, 汪席均, 江凌勇. 垂直向控制在矫正成人骨性Ⅱ类高角错畸形应用中的研究进展[J]. 中国口腔颌面外科杂志, 2021, 19(3): 284-288.
[10]	袁卫军, 李丽, 杨霞, 刘婷, 单瑛, 朱怡. 牙颌面畸形患者术后留置胃管对口腔健康相关生活质量的影响[J]. 中国口腔颌面外科杂志, 2019, 17(6): 518-521.
[11]	魏弘朴，应王君子，余婧爽，姜腾飞，李祥，王旭东. 三维打印钛合金颅颌面接骨板的表面及内部形态分析[J]. 中国口腔颌面外科杂志, 2019, 17(3): 210-215.
[12]	张天嘉, 徐昱婷, 沈国芳编译, 王旭东审校. 国际正颌外科发展回顾与展望[J]. 中国口腔颌面外科杂志, 2018, 16(6): 547-552.
[13]	孙红, 商洪涛, 何黎升. 正颌患者生存质量评估研究现状[J]. 中国口腔颌面外科杂志, 2018, 16(6): 559-562.
[14]	河奈玲, 洪越扬, 杨筱, 房兵, 江凌勇. 功能板影响错伴特发性髁突吸收正颌术后稳定性的初步研究[J]. 中国口腔颌面外科杂志, 2018, 16(4): 338-342.
[15]	魏弘朴, 余婧爽, 姜腾飞, 李祥, 王旭东. 三维打印钛合金颅颌面接骨板的生物力学性能分析[J]. 中国口腔颌面外科杂志, 2017, 15(6): 503-507.