数字化印模在口腔种植修复中的研究进展

doi:10.19438/j.cjoms.2020.05.019

中国口腔颌面外科杂志 ›› 2020, Vol. 18 ›› Issue (5): 469-473.doi: 10.19438/j.cjoms.2020.05.019

数字化印模在口腔种植修复中的研究进展

张翌婕, 史俊宇, 赖红昌

上海交通大学医学院附属第九人民医院·口腔医学院口腔种植科,国家口腔疾病临床医学研究中心上海市口腔医学重点实验室,上海市口腔医学研究所,上海 200011

收稿日期:2019-07-17 修回日期:2019-09-24 出版日期:2020-09-20 发布日期:2020-10-28
通讯作者: 赖红昌,E-mail: laihc1592@sh9hospital.org
作者简介:张翌婕（1994-）,女,硕士,E-mail: izhangyijie@163.com
基金资助:
国家自然科学基金（81771116）

Digital impressions in implant dentistry: a literature review

ZHANG Yi-jie, SHI Jun-yu, LAI Hong-chang

Department of Implant Dentistry, Shanghai Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine; National Clinical Research Center for Oral Diseases; Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology. Shanghai 200011, China;

Received:2019-07-17 Revised:2019-09-24 Online:2020-09-20 Published:2020-10-28

摘要/Abstract

摘要： 数字化印模是指使用口内扫描仪在患者口内无需直接接触即获取组织图像,并合成三维牙列影像的印模技术。数字化印模于口腔种植修复中的应用近年来开始受到关注,但其印模精度尚不明确,尤其是多颗种植体的数字化印模精度。本文详细介绍数字化印模的原理、在种植修复不同类型牙列缺损或缺失情况下的精度以及影响精度的相关因素,以期为数字化印模在种植修复中的临床应用提供参考依据。

关键词: 数字化印模, 口腔种植, 口内扫描仪, 计算机辅助设计与制作

Abstract: Digital impression is an impression technique that uses an intraoral scanner to acquire tissue images intraorally without direct contact and synthesize a three-dimensional dentition image. The application of digital impressions in implant dentistry has received more and more attention in recent years, but the accuracy of digital implant impressions is not clear, especially with multiple implants. This article reviewed different principles of intraoral scanners, the accuracy of digital implant impressions and accuracy-related factors, hoping to provide references for clinical application of digital impressions in implant dentistry.

Key words: Digital impressions, Dental implants, Intraoral scanners, CAD/CAM

中图分类号:

R782.1

张翌婕, 史俊宇, 赖红昌. 数字化印模在口腔种植修复中的研究进展[J]. 中国口腔颌面外科杂志, 2020, 18(5): 469-473.

ZHANG Yi-jie, SHI Jun-yu, LAI Hong-chang. Digital impressions in implant dentistry: a literature review[J]. China J Oral Maxillofac Surg, 2020, 18(5): 469-473.

参考文献

[1] Richert R, Goujat A, Venet L, et al.Intraoral scanner technologies: a review to make a successful impression[J]. J Healthc Eng, 2017, 2017: 8427595.
[2] Abdel-Azim T, Zandinejad A, Elathamna E, et al.The influence of digital fabrication options on the accuracy of dental implant-based single units and complete-arch frameworks[J]. Int J Oral Maxillofac Implants, 2014, 29(6): 1281-1288.
[3] Joda T, Bragger U.Patient-centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial[J]. Clin Oral Implants Res, 2016, 27(12): e185-e189.
[4] Basaki K, Alkumru H, De Souza G, et al.Accuracy of digital vs conventional implant impression approach: a three-dimensional comparative in vitro analysis[J]. Int J Oral Maxillofac Implants, 2017, 32(4): 792-799.
[5] Van Der Meer WJ, Andriessen FS, Wismeijer D, et al. Application of intra-oral dental scanners in the digital workflow of implantology[J]. PLoS One, 2012, 7(8): e43312.
[6] Syrek A, Reich G, Ranftl D, et al.Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling[J]. J Dent, 2010, 38(7): 553-559.
[7] Gimenez B, Ozcan M, Martinez-Rus F, et al.Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth[J]. Clin Implant Dent Relat Res, 2015, 17(Suppl 1): e54-e64.
[8] Imburgia M, Logozzo S, Hauschild U, et al.Accuracy of four intraoral scanners in oral implantology: a comparative in vitro study[J]. BMC Oral Health, 2017, 17(1): 92.
[9] Giménez B, Özcan M, Martínez-Rus F, et al.Accuracy of a digital impression system based on active triangulation technology with blue light for implants: effect of clinically relevant parameters[J]. Implant Dent, 2015, 24(5): 498-504.
[10] Giménez B, Ôzcan M, Martínez-Rus F, et al.Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth[J]. Int J Oral Maxillofac Implants, 2014, 29(4): 853-862.
[11] Gherlone E, Cappare P, Vinci R, et al.Conventional versus digital impressions for "All-on-Four" restorations[J]. Int J Oral Maxillofac Implants, 2016, 31(2): 324-330.
[12] Vandeweghe S, Vervack V, Dierens M, et al.Accuracy of digital impressions of multiple dental implants: an in vitro study[J]. Clin Oral Implants Res, 2017, 28(6): 648-653.
[13] Alshawaf B, Weber HP, Finkelman M, et al.Accuracy of printed casts generated from digital implant impressions versus stone casts from conventional implant impressions: a comparative in vitro study[J]. Clin Oral Implants Res, 2018, 29(8): 835-842.
[14] Flugge TV, Att W, Metzger MC, et al.Precision of dental implant digitization using intraoral scanners[J]. Int J Prosthodont, 2016, 29(3): 277-283.
[15] Rhee YK, Huh YH, Cho LR, et al.Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition[J]. J Adv Prosthodont, 2015, 7(6): 460-467.
[16] Muhlemann S, Greter EA, Park JM, et al.Precision of digital implant models compared to conventional implant models for posterior single implant crowns: a within-subject comparison[J]. Clin Oral Implants Res, 2018, 29(9): 931-936.
[17] Lee SJ, Betensky RA, Gianneschi GE, et al.Accuracy of digital versus conventional implant impressions[J]. Clin Oral Implants Res, 2015, 26(6): 715-719.
[18] Alikhasi M, Alsharbaty MHM, Moharrami M.Digital implant impression technique accuracy: a systematic review[J]. Implant Dent, 2017, 26(6): 929-935.
[19] Alsharbaty MHM, Alikhasi M, Zarrati S, et al.A clinical comparative study of 3-dimensional accuracy between digital and conventional implant impression techniques[J]. J Prosthodont, 2019, 28(4): e902-e908.
[20] Lin WS, Harris BT, Elathamna EN, et al.Effect of implant divergence on the accuracy of definitive casts created from traditional and digital implant-level impressions: an in vitro comparative study[J]. Int J Oral Maxillofac Implants, 2015, 30(1): 102-109.
[21] Jemt T, Lie A.Accuracy of implant-supported prostheses in the edentulous jaw: analysis of precision of fit between cast gold-alloy frameworks and master casts by means of a three-dimensional photogrammetric technique[J]. Clin Oral Implants Res, 1995, 6(3): 172-180.
[22] Ciocca L, Meneghello R, Monaco C, et al.In vitro assessment of the accuracy of digital impressions prepared using a single system for full-arch restorations on implants[J]. Int J Comput Assist Radiol Surg, 2018, 13(7): 1097-1108.
[23] Andriessen FS, Riikens DR, Van Der Meer WJ, et al. Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study[J]. J Prosthet Dent, 2014, 111(3): 186-194.
[24] Alikhasi M, Siadat H, Nasirpour A, et al.Three-dimensional accuracy of digital impression versus conventional method: effect of implant angulation and connection type[J]. Int J Dent, 2018, 2018: 3761750.
[25] Menini M, Setti P, Pera F, et al.Accuracy of multi-unit implant impression: traditional techniques versus a digital procedure[J]. Clin Oral Investig, 2018, 22(3): 1253-1262.
[26] Papaspyridakos P, Gallucci GO, Chen CJ, et al.Digital versus conventional implant impressions for edentulous patients: accuracy outcomes[J]. Clin Oral Implants Res, 2016, 27(4): 465-472.
[27] Fukazawa S, Odaira C, Kondo H.Investigation of accuracy and reproducibility of abutment position by intraoral scanners[J]. J Prosthodont Res, 2017, 61(4): 450-459.
[28] Giménez B, Pradíes G, Martínez-Rus F, et al.Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters[J]. Int J Oral Maxillofac Implants, 2015, 30(1): 56-64.
[29] Gimenez-Gonzalez B, Hassan B, Ozcan M, et al.An in vitro study of factors influencing the performance of digital intraoral impressions operating on active wavefront sampling technology with multiple implants in the edentulous maxilla[J]. J Prosthodont, 2017, 26(8): 650-655.
[30] Papaspyridakos P, Chen CJ, Gallucci GO, et al.Accuracy of implant impressions for partially and completely edentulous patients: a systematic review[J]. Int J Oral Maxillofac Implants, 2014, 29(4): 836-845.

数字化印模在口腔种植修复中的研究进展

Digital impressions in implant dentistry: a literature review

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	魏洪波, 周铭浩, 李德华. 种植导航虚拟教学系统在本科教学中的应用效果评价[J]. 中国口腔颌面外科杂志, 2023, 21(5): 502-505.
[2]	曾令紫, 莫安春. 富血小板纤维蛋白在口腔种植中的应用进展[J]. 中国口腔颌面外科杂志, 2023, 21(5): 518-521.
[3]	戴小锋, 黄昕, 李成, 王辰昕, 施乐, 余优成. 2种CAD/CAM口腔数字化导板精度的比较[J]. 中国口腔颌面外科杂志, 2023, 21(1): 29-35.
[4]	金夏悦, 顾迎新. 骨质疏松对口腔种植修复影响的研究进展[J]. 中国口腔颌面外科杂志, 2023, 21(1): 81-86.
[5]	朱青青, 孙强, 王冬玲, 周弘. 红茴香注射液用于缓解种植术后不良反应的效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(3): 230-234.
[6]	武玉鹏, 梅东梅, 张琦, 王文雪, 赵保东. 国产数字化动态导航和数字化静态导板在口腔种植手术中的精准度及手术时长分析[J]. 中国口腔颌面外科杂志, 2021, 19(2): 151-155.
[7]	魏洪波, 王新革, 李德华. 手术直播在口腔种植本科教学中的应用效果评价[J]. 中国口腔颌面外科杂志, 2020, 18(5): 465-468.
[8]	阮丹平, 杨奕辰, 邓思楠, 赵怨怨, 吴春云. 2型糖尿病患者术前预防性应用抗生素对口腔种植疗效的影响：3~5年回顾性研究[J]. 中国口腔颌面外科杂志, 2020, 18(3): 231-235.
[9]	王文雪, 姜帅, 梅东梅, 李晓静, 姚晨阳, 王大山, 赵保东. 3D打印导板在上前牙种植中的精度评价[J]. 中国口腔颌面外科杂志, 2020, 18(2): 127-131.
[10]	徐逢源, 周琳怡, 顾迎新. 3种含漱液在口腔种植术后维护口腔卫生中的效果比较[J]. 中国口腔颌面外科杂志, 2019, 17(1): 53-57.
[11]	李晨琳, 徐光宙. 口腔种植中骨增量技术的应用进展[J]. 中国口腔颌面外科杂志, 2018, 16(6): 553-558.
[12]	郭鹏女, 郭华艳, 钟华星, 黄兰, 陈卫东, 张迎娣, 黄远亮. 个别正常▌成人上前牙美学区唇、腭侧骨板厚度测量分析[J]. 中国口腔颌面外科杂志, 2016, 14(4): 337-343.
[13]	赵璟阳#，樊林峰#，王艳辉，张善勇，赵保东. 数字化导板在口腔种植临床应用中的精确度评价[J]. 中国口腔颌面外科杂志, 2015, 13(6): 508-514.
[14]	史俊宇, 赖红昌. 美学区种植修复的软组织稳定性研究进展[J]. 中国口腔颌面外科杂志, 2014, 12(1): 87-90.