3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用

doi:10.19438/j.cjoms.2018.04.015

中国口腔颌面外科杂志 ›› 2018, Vol. 16 ›› Issue (4): 371-375.doi: 10.19438/j.cjoms.2018.04.015

3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用

黄立^1,*, 李璐^2,*, 江灿洋¹, 黄建平¹, 江燕¹, 廖云阳¹, 林李嵩¹

1.福建医科大学附属第一医院口腔颌面外科,福建省颌面医学中心,福建医科大学面部整复与重建研究室,福建福州 350004;
2.福建医科大学口腔医学院,福建福州 350004

收稿日期:2018-03-14 修回日期:2018-04-25 出版日期:2018-07-20 发布日期:2018-08-09
通讯作者: 林李嵩,Tel:0591-87982098, E-mail：dr_lls@163.com
作者简介:黄立（1976-）,男,硕士,副主任医师, E-mail：13599979505@163.com;李璐（1986-）,女,硕士,主治医师, E-mail：81095091@qq.com。
基金资助:
福建省卫生计生中青年骨干人才培养项目（2016-ZQN-48）; 福建医科大学高等教育教学改革工程项目（J16026）; 福建省科技计划引导性项目（2018Y0026）

Application of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases HUANG Li¹, LI Lu², JIANG Can-yang¹, HUANG Jian-ping¹, JIANG Yan¹, LIAO Yun-yang¹, LIN Li-song¹

HUANG Li¹, LI Lu², JIANG Can-yang¹, HUANG Jian-ping¹, JIANG Yan¹, LIAO Yun-yang¹, LIN Li-song¹

1.Laboratory of Facial Plastic and Reconstructive Surgery, Maxillofacial Medical Center, Department of Oral and Maxillofacial Surgery; The First Affiliated Hospital, Fujian Medical University. Fuzhou 350004；
2.College of Stomatology, Fujian Medical University. Fuzhou 350004, Fujian Province, China

Received:2018-03-14 Revised:2018-04-25 Online:2018-07-20 Published:2018-08-09

摘要/Abstract

摘要： 目的:探讨基于3D打印技术建立临床病例教学数据库在口腔颌面外科骨性疾病临床教学中的应用价值。方法:选取80例口腔颌面部骨性疾病患者的3D打印模型和临床资料,建立临床病例教学数据库。选择2013级福建医科大学口腔医学专业学生34名,随机分为实验组和对照组,每组17名。对照组采取传统教学模式,实验组结合3D打印模型建立的临床病例教学数据库教学,授课结束后采用同一考核标准(百分制)从理论和技能2个方面对学生进行考核,并用调查问卷评估学习效果。采用SPSS19.0软件包对数据进行独立样本t检验。结果:实验组临床考核成绩为（78.82±3.70）分,对照组为（72.94±3.70）分;实验组调查问卷成绩为（22.88±0.70）分,对照组为（17.29±1.53）分,差异均有统计学意义（P<0.05）。结论:使用3D打印模型建立临床病例教学数据库,可以帮助学生扎实地掌握学习内容,培养临床思维和实践操作能力,激发学生的学习热情和自信,值得推广应用。

关键词: 口腔颌面外科, 骨性疾病, 3D打印, 临床教学, 数据库

Abstract: PURPOSE:To explore the value of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases. METHODS: 3D printing models and clinical data of 80 cases with typical oral and maxillofacial bone diseases were selected to establish teaching database of typical clinical cases. Thirty-four undergraduates (grade 2013) majoring in stomatology from Fujian Medical University were randomly divided into experimental group and control group, with 17 students in each group. Students in the control class were received traditional teaching methods, whereas the new teaching model of combination with typical clinical case teaching database based on 3D printing and clinical data was employed in the experimental group. All students were examined in theory and skill with the same examination standard (a hundred marks), and the learning effect was evaluated by questionnaire after the courses ended. The data were compared with independent-samples t test using SPSS 19.0 software package. RESULTS: The overall clinical assessment score of the experimental group was(78.82±; 3.70), while the score of the control group was(72.94±; 3.70). In the experimental group, the score result of questionnaire was(22.88±; 0.70), while the score of the control group was(17.29±; 1.53), the differences were statistically significant(P<; 0.05). CONCLUSIONS: Use of teaching database of typical clinical cases based on 3D-printing in the clinical teaching of oral maxillofacial bone diseases can significantly help students to firmly grasp the teaching contents, form their clinical ideation, foster their practical capability and stimulate their learning enthusiasm and confidence, which is worth wide application.

Key words: Oral and maxillofacial surgery, Bone diseases, 3D printing, Clinical teaching, Database

中图分类号:

G642.4

黄立, 李璐, 江灿洋, 黄建平, 江燕, 廖云阳, 林李嵩. 3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(4): 371-375.

HUANG Li, LI Lu, JIANG Can-yang, HUANG Jian-ping, JIANG Yan, LIAO Yun-yang, LIN Li-song. Application of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases HUANG Li¹, LI Lu², JIANG Can-yang¹, HUANG Jian-ping¹, JIANG Yan¹, LIAO Yun-yang¹, LIN Li-song¹[J]. China J Oral Maxillofac Surg, 2018, 16(4): 371-375.

参考文献

[1] 李华, 韩正学, 邢汝东. 典型病例引导在口腔颌面外科见习教学中的应用[J]. 北京口腔医学, 2016, 24(5): 287-288.
[2] 蔡卜磊, 任荣, 李岩, 等. 数字化三维正颌手术设计与模拟系统在本科生教学中的应用[J]. 牙体牙髓牙周病学杂志, 2017, 27(7): 422-425.
[3] 玉琨, 邝海. 3D手术视频在口腔颌面外科临床教学中的应用[J]. 大众科技, 2015, 17(12): 130-131.
[4] Canellas JV, Araujo MM, Arce JP.The use of anatomical models for learning anesthesia techniques in oral surgery[J]. Indian J Dent Res, 2013, 24(3): 326-330.
[5] Ono I, Abe K, Shiotani S, et al.Producing a full-scale model from computed tomographic data with the rapid prototyping technique using the binder jet method: a comparison with the laser lithography method using a dry skull[J]. J Craniofac Surg, 2000, 11(6): 527-537.
[6] Ligon SC, Liska R, Stampfl J, et al.Polymers for 3D printing and customized additive manufacturing[J]. Chem Rev, 2017, 117(15): 10212-10290.
[7] Giordano M, Ausiello P, Martorelli M, et al.Reliability of computer designed surgical guides in six implant rehabilitations with two years follow-up[J]. Dent Mater, 2012, 28(9): e168-177.
[8] Chen S, Pan Z, Wu Y, et al.The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail[J]. Sci Rep, 2017, 7(1): 575.
[9] 陈鹏, 刘冰, 魏博, 等. 3D打印技术在颌骨缺损修复重建教学中的应用[J]. 口腔颌面修复学杂志, 2015, 16(3): 166-168.
[10] Bartel T, Rivard A, Jimenez A, et al.Medical three-dimensional printing opens up new opportunities in cardiology and cardiac surgery[J]. Eur Heart J, 2017, 39(15): 1246-1254.
[11] Habók A, Nagy J.In-service teachers' perceptions of project-based learning[J]. Springerplus, 2016, 5: 83.
[12] Behar-Horenstein LS, Catalanotto FA, Nascimento MM.Anticipated and actual implementation of case-based learning by dental faculty members during and after training[J]. J Dent Educ, 2015, 79(9): 1049-1060.
[13] Rafai N, Lemos M, Kennes LN, et al.Anatomy meets dentistry! Linking anatomy and clinical practice in the preclinical dental curriculum[J]. BMC Med Educ, 2016, 16(1): 305.
[14] Henningsohn L, Dastaviz N, Stathakarou N, et al.KIUrologyX: Urology as you like it-a massive open online course for medical students, professionals, patients, and laypeople alike[J]. Eur Urol, 2017, 72(3): 321-322.
[15] Bagaria V, Deshpande S, Rasalkar DD, et al.Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures[J]. Eur J Radiol, 2011, 80(3): 814-820.
[16] Ueda K, Shigemura Y, Otsuki Y, et al.Three-dimensional computer-assisted two-layer elastic models of the face[J]. Plast Reconstr Surg, 2017, 140(5): 983-986.
[17] Ng WL, Wang S, Yeong WY, et al.Skin Bioprinting: Impending Reality or Fantasy?(Trends in Biotechnology 34, 689-699; September 2016)[J]. Trends Biotechnol, 2017, 35(3): 278.

3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用

Application of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases HUANG Li¹, LI Lu², JIANG Can-yang¹, HUANG Jian-ping¹, JIANG Yan¹, LIAO Yun-yang¹, LIN Li-song¹

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陶文昊, 田刚, 韩煦, 祝迎春, 徐晓刚. 钛合金支架及其表面处理技术研究进展[J]. 中国口腔颌面外科杂志, 2024, 22(5): 505-509.
[2]	袁露函, 楚晨, 袁荣涛. 高活性骨替代材料在颌面部骨组织工程中的应用进展[J]. 中国口腔颌面外科杂志, 2024, 22(4): 394-399.
[3]	李永清, 张赟, 惠铄壹, 惠小勇, 许广杰, 杨霞, 肖伯承, 侯锐. 3种不同材料三维模型牙临床应用特点比较[J]. 中国口腔颌面外科杂志, 2024, 22(3): 239-244.
[4]	郁玺玺, 徐诸凤, 张媛媛, 吕明明, 王进兵, 王悦平. 3D打印偏颌测量仪的研制及在偏颌患者康复期的应用效果[J]. 中国口腔颌面外科杂志, 2024, 22(3): 255-260.
[5]	许鑫, 夏明, 金晨昱, 周韧, 徐辉. 经鼻腔气管插管固定器用于口腔颌面外科全麻患者鼻保护的效果评价[J]. 中国口腔颌面外科杂志, 2023, 21(5): 486-490.
[6]	撒国良, 余自力, 朱鑫飚, 杨学文. “一体两翼”教学模式在口腔颌面外科理论教学中的探索[J]. 中国口腔颌面外科杂志, 2023, 21(5): 506-510.
[7]	闫星泉, 南欣荣, 任晓彦, 赵佳雄, 孟兵. 3D显微镜在35例口腔颌面外科手术中的应用效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(6): 590-593.
[8]	黄建平, 江灿洋, 江燕, 张晓贤, 阮鑫, 施斌, 林李嵩, 黄立. 多维数字化模拟技术在口腔颌面外科研究生培养中的应用[J]. 中国口腔颌面外科杂志, 2022, 20(6): 594-598.
[9]	樊文慧, 劳峥, 石慧烽, 毕帆, 涂文勇, 胡海生. 3D打印可分离式口腔支架在口腔癌放疗中的摆位准确性研究[J]. 中国口腔颌面外科杂志, 2022, 20(5): 466-470.
[10]	肖育栋, 郭凯欣, 杨乐, 邓威, 曾滨, 张思恩, 劳小媚, 廖贵清, 梁玉洁. 369例口腔癌患者汉语普通话语音数据库的建立与初步评价[J]. 中国口腔颌面外科杂志, 2022, 20(2): 151-157.
[11]	费娟, 杨悦来, 胡崟清. 1 428例口腔颌面外科全麻患者复苏期喉痉挛的相关因素分析[J]. 中国口腔颌面外科杂志, 2022, 20(2): 164-167.
[12]	罗彬, 周美云, 田绣云, 陈鑫如, 韩瑞, 徐锦程. 数字化及3D打印联合内镜辅助技术治疗12例颧骨颧弓骨折效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(2): 188-192.
[13]	张秀秀, 孙健, 李亚莉, 刘延山, 陈立强, 许尧祥, 徐泽先, 孟坤, 孙鸣, 周东阳, 徐典, 高小涵, 程立地. 数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析[J]. 中国口腔颌面外科杂志, 2022, 20(1): 15-21.
[14]	史伟红, 刘严, 阿曼妮萨罕·加帕尔, 阿依达娜·乌拉尔别克, 贺琦, 凌彬. 3D打印定位导板在辅助制备股前外侧穿支皮瓣中的临床应用[J]. 中国口腔颌面外科杂志, 2022, 20(1): 52-57.
[15]	杨溪, 房笑, 贺捷. 新冠疫情对口腔颌面外科教学模式的影响[J]. 中国口腔颌面外科杂志, 2022, 20(1): 81-87.

3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用

Application of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases HUANG Li1, LI Lu2, JIANG Can-yang1, HUANG Jian-ping1, JIANG Yan1, LIAO Yun-yang1, LIN Li-song1

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

Application of clinical case database based on 3D-printing in clinical teaching of oral maxillofacial bone diseases HUANG Li¹, LI Lu², JIANG Can-yang¹, HUANG Jian-ping¹, JIANG Yan¹, LIAO Yun-yang¹, LIN Li-song¹