分段取模计算机配准组合获取完整牙列模型的方法建立

中国口腔颌面外科杂志 ›› 2016, Vol. 14 ›› Issue (3): 198-202.

分段取模计算机配准组合获取完整牙列模型的方法建立

付琳¹, 丛丙峰¹, 谢瑞², 吴秦², 白石柱^{2*, *}, 刘彦普^{1*, *}

1.第四军医大学口腔医院口腔颌面外科;
2.口腔修复科,陕西西安 710032

收稿日期:2016-01-25 出版日期:2016-06-20 发布日期:2016-07-04
通讯作者: 刘彦普,E-mail: liuyanpu@fmmu.edu.cn;白石柱,E-mail: baishizhu@foxmail.com。^*共同通信作者
作者简介:付琳（1987-）,女,在读硕士研究生,E-mail:fulin120@263.net
基金资助:
国家自然科学基金（81271188）

Establishing a method for composing sectional models into a complete dental cast by computer registration

FU Lin¹, CONG Bing-feng¹, XIE Rui², WU Qin², BAI Shi-zhu², LIU Yan-pu¹

1.Department of Oral and Maxillofacial Surgery, 2.Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University. Xi'an 710032, Shaanxi Province, China)

Received:2016-01-25 Online:2016-06-20 Published:2016-07-04
Supported by:
英文基金

摘要/Abstract

摘要： 目的通过口内分段取模再由计算机完成配准组合,建立一种获取完整牙列模型的新方法,初步验证其精度,评价其可行性。方法对10个完整石膏牙列模型按照临床操作要求进行分段取模,对分段模型进行三维扫描,基于逆向工程软件建模技术,在计算机软件中将分段模型配准组合,获得完整牙列,并与原完整模型进行三维比较。采用SPSS 21.0软件包对数据进行统计学分析,验证其精度。结果建立了分段取模再由计算机配准组合获取完整牙列模型的方法,通过比较组合模型与原模型的牙列面形态特征,得到最小观测误差为（0.046±0.055） mm,最大观测误差为（0.032±0.115） mm,3种建模方法间无显著差异（P>0.05）。结论计算机配准组合分段牙列模型可获得准确的、满足临床应用的完整牙列模型,本方法有望解决开口受限患者采集完整牙列模型中存在的问题。

关键词: 开口受限, 分段取模, 计算机辅助设计, 牙列模型

Abstract: PURPOSE: The goal of this study was to get some sections of a dental cast in the mouth and combine them through computer to get the whole image of the dental cast, then test the accuracy and feasibility of the new method. METHODS: The bite tray impressions of the sections of 10 dental casts were obtained and the impressions were scanned by computer. All the digital image data from three-dimensional optical scanning of a dental cast were combined to get the whole image of the dental cast. The image was used to compare with the dental cast to determine the accuracy. The data were analyzed using SPSS 21.0 software package. RESULTS: The new method to get the whole image of the dental cast by combining the 3D-scanned digital image data through computer was successfully established. By comparing the combined model with initial model, the smallest error observed was (0.046±0.055) mm and the biggest error observed was (0.032±0.115) mm. No significant difference between 3 methods was observed (P>0.05). CONCLUSIONS: The accuracy of dental cast can be obtained by combination of the images of sections of the dental cast through computer. This method can solve the problem in patients who have restriction of mouth opening and difficulty to get the whole dental cast.

Key words: Limitation of mouth opening, Sectional model, Computer aided design, Dental cast

中图分类号:

R782

付琳, 丛丙峰, 谢瑞, 吴秦, 白石柱, 刘彦普. 分段取模计算机配准组合获取完整牙列模型的方法建立[J]. 中国口腔颌面外科杂志, 2016, 14(3): 198-202.

FU Lin, CONG Bing-feng, XIE Rui, WU Qin, BAI Shi-zhu, LIU Yan-pu. Establishing a method for composing sectional models into a complete dental cast by computer registration[J]. China J Oral Maxillofac Surg, 2016, 14(3): 198-202.

参考文献

[1] Rathi N, Heshmati R, Yilmaz B, et al. A technique for fabricating a hinged mandibular complete dental prosthesis with swing lock for a patient with microstomia [J]. J Prosthet Dent, 2013, 110(6): 540-543.
[2] Krishna Ch V, Mahendranadh Reddy K, Gupta N, et al. Fabrication of customized sectional impression trays in management of patients with limited mouth opening: a simple and unique approach [J]. Case Rep Dent, 2013, 2013: 275047.
[3] Hegde C, Prasad K, Prasad A, et al. Impression tray designs and techniques for complete dentures in cases of microstomia-a review [J]. J Prosthodont Res, 2012, 56(2): 142-146.
[4] Baslas V, Agrawal KK, Chand P, et al. Lock and key cast metallic sectional denture: a revised approach for oral rehabilitation of a patient with microstomia [J]. BMJ Case Reports, 2014, 2014. pii: bcr2013203402.
[5] Dewan1SK, Arora A, Sehgal M, et al. Microstomia a treatment challenge to a prosthodontist [J]. J Clin Diagn Res, 2015, 9(4): ZD12-13.
[6] Gözde Türk A, Ulusoy M. A collapsible partial denture for a patient with limited mouth opening induced by scleroderma: a clinical report [J]. J Prosthodont, 2015, 24(4): 334-338.
[7] Gauri M, Ramandeep D. Prosthodontic management of a completely edentulous patient with microstomia: a case report [J]. J Indian Prosthodont Soc, 2013, 13(3): 338-342.
[8] Aswini Kumar K, Bhat V, Nandini VV, et al. Preliminary impressions in microstomia patients: an innovative technique [J]. J Indian Prosthodont Soc, 2013, 13(1): 52-55.
[9] Patel A, Sethuraman R, Prajapati P, et al. Microstomia: entry made easy in no entry (with sectional tray and sectional denture) [J]. BMJ Case Rep, 2013, 2013. pii: bcr2013200053.
[10] 苏庭舒, 孙健. 口内数字化印模技术 [J].中华临床医师杂志(电子版), 2012, 6(19): 5780-5782.
[11] Chochlidakis KM, Papaspyridakos P, Geminiani A, et al. Digital versus conventional impressions for fixed prosthodontics: a systematic review and meta-analysis [J]. J Prosthet Dent, 2016, pii:S0022-3913(16)00041-X.
[12] Yuzbasioglu E, Kurt H, Turunc R, et al. Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes [J]. BMC Oral Health, 2014, 14: 10.
[13] 何浩, 林映荷. 口腔印模精确性的影响因素 [J]. 广东牙病防治, 2008, 16(9): 428-430.
[14] 宋杨, 孙玉春, 赵一娇, 等. 牙颌模型三维扫描仪精度定量评价 [J]. 北京大学学报(医学版), 2013, 45(1): 140-144.
[15] 李丹, 邸萍. 现代口腔数字印模系统现状与前景 [J]. 实用口腔医学杂志, 2014, 30(2): 260-264.
[16] 肖静, 滕伟. 三维数字化扫描在口腔修复领域中的应用 [J]. 国际口腔医学杂志, 2014, 41(1): 63-67.